Kia Sorento: Fuel Tank Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Fuel Tank Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Tank Installation

1.
Install in the reverse order of removal.

Fuel tank band installation bolt:
44.1 ~ 58.8 N.m (4.5 ~ 6.0 kgf.m, 32.6 ~ 43.4 lb-ft)

Fuel Tank Removal
1. Release the residual pressure in fuel line. (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line") ...

Fuel Pump Inspection
[Fuel pump motor] 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump assembly. ...

See also:

Components Location
1. Fuel tank 2. Fuel pump 3. Fuel filter 4. Fuel pressure regulator 5. Canister 6. Fuel tank air filter 7. Fuel tank band 8. Fuel tank pressure sensor (FTPS) 9. ...

Rear Glass Defogger Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the center fascia panel (A). (Refer to Body - "Crash pad") ...

Telemetics Unit (TMU) Component
Connector Pin Specification No. Pin Name Type From To Description (Wiring Spec.) 1 GND DC Ground TMU Battery ...

Copyright www.ksmanual.com 2014-2026