Kia Sorento: Front Radar Removal
| Removal |
| 1. |
Perform the order below with the KDS before replacing the front radar.
(S/W Management → Front Radar → System Identification)
|
| 2. |
Remove the front bumper assembly.
(Refer to Body - "Front Bumper Assembly")
|
| 3. |
Disconnect the front radar connector (A).
|
| 4. |
Remove the front radar (A) after removing the bolts.
|
On Vehicle Inspection
Visual inspection
If the function of FCA, SCC, NSCC, or HDA 2 is not operable or DTC occurs, check the following below.
1.
Check...
Front Radar On Vehicle Inspection
Special Service Tool
Tool Name / Number
Illustration
Description
Digital Inclinometer09958 - 3T1...
Front Radar Installation
See also:
Components
1. Cooling fan
2. Radiator upper hose
3. Radiator lower hose
4. Radiator
5. Condenser
6. Side air guard
7. Over flow hose
8. Reservior tank
9. Radiator cap
...
Gasoline Particulate Filter (GPF) Pressure Sensor Removal and Installation
Removal
1.
Disconnect the battery negative (-) terminal.
2.
Remove the engine ...
Shift Cable Installation
Installation
1.
Insert "N range fixing pin"(A) of shift lever after checking the shift lever and manual control
l ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0552