Kia Sorento: Shift Cable Installation
| Installation |
| 1. |
Insert "N range fixing pin"(A) of shift lever after checking the shift lever and manual control
lever are on "N" range.
|
| 2. |
Install the shift cable retainer (A) by tightening nuts.
|
| 3. |
Insert the snap pin (A) after installing the shift cable.
|
| 4. |
Install the shift cable (B) to bracket and then lightly tighten the nut (A).
|
| 5. |
Tighten the nut (A) with the specified torque after removing free play by pushing the shift cable in the
direction of the arrow.
|
| 6. |
Make sure to get rid of "N range fixing pin"(A).
|
| 7. |
Install the floor console assembly.
(Refer to Body - "Floor Console Assembly")
|
| 8. |
Install the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
| 9. |
Install the battery and battery tray.
(Refer to Engine Mechanical System - "Air Cleaner")
|
| 10. |
Operate the shift lever to check whether each position (P, R, N, D) works.
|
Shift Cable Removal
Automatic Transaxle System
See also:
Tightening Torque
Tightening Torque
Item
N·m
kgf·m
lb·ft
lb·in
Engine mounting
...
Refrigerant Recovery/Recycling/Charging/Vacuum/Leak Test
Refrigerant Recovery/Recycling/Charging/Vacuum/Leak Test (R-134a)
Equipped with R-134a recovery/recycling/charging equipment
1.
...
Troubleshooting
Troubleshooting
Hard to turn steering wheel
Suspected causes
Repair
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
