Kia Sorento: Front Brake Caliper Components and Components Location
| Components |
| 1. Bleed screw 2. Guide rod bolt 3. Caliper body 4. Guide rod pin 5. Guide rod pin seal 6. Guide rod pin boot 7. Caliper carrier 8. Brake inner pad |
9. Pad cover shim 10. Pad inner shim 11. Pad retainer 12. Brake outer pad 13. Pad outer shim 14. Caliper piston 15. Piston seal 16. Piston boot |
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Spe ...
Direct Electro Hydraulic Actuator Coupling Installation
1.
Install in the reverse order of removal.
...
Joint Assembly (Transaxle side) Repair procedures
Removal
...