Kia Sorento: Engine And Transmission Assembly

Special Service Tools

Tool (Number and name) Illustration Use Crankshaft front oil seal installer (09214-2W100) (09231-H1100) Installation of the front oil sea ...

Engine Cover Removal and Installation

1. Remove the engine cover (A). 2. Install in the reverse order of removal. ...

See also:

Windshield Wiper-Washer Switch Inspection
Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch. Wiper Switch Washer Switch R ...

Engine Control Module (ECM) Adjustment
• After replacing the ECM of the vehicle with the immobilizer, the following procedure must be performed. 1) [If installing a used ECM] ...

Fuel Filter Removal
1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump�) 2. Disconnect the fuel sender connector (A). ...