Kia Sorento: Direct Oncoming functionDirect Oncoming functions for Forward Collision-Avoidance Assist are:
Collision Warning
Emergency Braking
Stopping vehicle and ending brake control
Collision Warning
|
(A) Collision Warning |
Collision Warning can alert you with Forward Safety warning light blinking (
), a warning message, an
audible
warning, and steering wheel vibration.
Collision Warning may be activated under the following conditions:
Your speed is approximately 19-80 mph (30-130 km/h) (*if equipped: 6-80mph (10-130 km/h)).
The oncoming vehicle speed is above approximately 6 mph (10 km/h).
Emergency Braking
|
(A) Emergency Braking |
Emergency Braking can alert you with Forward Safety warning light blinking (
), a warning message, an audible
warning, and steering wheel vibration.
Emergency Braking may be activated in the following conditions:
Your driving speed is approximately 19-80 mph (30-130 km/h).
The oncoming vehicle speed is above approximately 6 mph (10 km/h).
Stopping vehicle and ending brake control
|
(A) Drive carefully |
When Emergency Braking stops your vehicle, a warning message appears on the instrument cluster.
For safety purposes, you should immediately engage the brake pedal and check the vehicle’s surroundings.
Brake control ends approximately 2 seconds after Emergency Braking stops your vehicle.
CAUTION
If your vehicle or the oncoming vehicle is not driving straight, the Front Oncoming function warning and control may be late or may not operate.
When driving at night, the ability to detect motorcycles is decreased. Thus, the Forward Collision- Avoidance Assist system may temporarily be limited or not work.
TIP
Press the hazard lights button to turn OFF the warning sound during collision warning and emergency braking.
Junction Turning function
Junction Crossing function: (if equipped)Interior features
A wide array of refined comfort and utility features are built into the cabin of the Kia Sorento to elevate the
travel experience for every occupant. ...
Occupant Detection system (ODS) Installation
1.
Install the ODS equipped seat cushion assembly. (Refer to the
Body group- Seat)
2.
Install the front passenger seat assembly.
( ...
Winter driving
Severe weather conditions in the winter result in greater wear and other problems.
To minimize the problems of winter driving, you should follow these suggestions:
Snowy or icy conditions
To driv ...