Kia Sorento: Junction Crossing function: (if equipped)Junction turning functions for Forward Collision-Avoidance Assist on your Kia Sorento are:
Collision Warning
Emergency Braking
Stopping vehicle and ending brake control
Collision Warning
|
(A) Collision Warning |
Collision Warning can alert you with Forward Safety warning light blinking (
), a warning message, an audible
warning,
and steering wheel vibration to keep you fully aware of potential hazards at intersections.
Collision Warning may be activated under the following conditions:
Your speed is approximately 6-34 mph (10-55 km/h).
The crossing vehicle speed is approximately 6-37 mph (10-60 km/h).
Emergency Braking
|
(A) Emergency Braking |
Emergency Braking can alert you with Forward Safety warning light blinking (
), a warning message,
an
audible warning, and steering wheel vibration. Brake assist may activate to help avoid a collision with a vehicle.
Emergency Braking may be activated in the following conditions:
Your driving speed is approximately 6-34 mph (10-55 km/h).
The crossing vehicle speed is approximately 6-25 mph (10-40 km/h).
Stopping vehicle and ending brake control
|
(A) Drive carefully |
If Emergency Braking stops your vehicle, a warning message appears on the instrument cluster.
For safety purposes, you should immediately engage the brake pedal and check the vehicle’s surroundings.
Brake control ends approximately 2 seconds after Emergency Braking stops your vehicle.
CAUTION
If the angle of possible collision with the crossing vehicle is beyond a certain range, Junction Crossing warning and control may be late or may not operate.
Direct Oncoming function
Lane-Change Oncoming function: (if equipped)Air Cleaner Removal and Installation
1.
Remove the engine cover.
2.
Remove the air duct (A).
3.
Remove the battery.
(Refer to Engi ...
Description
Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant
passage of the cylinder head for detecting the engine coolant temperature. The
ECTS uses a thermistor that changes re ...
Parking Assist Sensor Installation
1.
Install the rear ultra sensor after connecting the connector.
2.
Install the rear bumper cover.
3.
Connect t ...