Kia Sorento: Front Disc Brake Removal - Brake System - Brake System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Front Disc Brake Removal

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Brake System / Brake System / Front Disc Brake Removal

1.
Remove the front wheel & tire.

Tightening torque:
88.3 ~107.9 N.m (9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft)

2.
Loosen the hose eyebolt (C) and caliper mounting bolts (B), then remove the front caliper assembly (A).

Tightening torque:
Brake hose to caliper (C) :
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)
Caliper assembly to knuckle (B) :
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.3 lb-ft)

3.
Remove the front brake disc by loosening the screws (A).

Front Disc Brake Components
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

Front Disc Brake Replacement
Front brake pads 1. Loosen the guide rod bolt (B) and then remove caliper body (A). 2. Replace pad shim (D), pad retainers (C) and b ...

See also:

Automatic transaxle (If equipped)
Automatic transaxle operation The automatic transaxle has 6 forward speeds and one reverse speed. The individual speeds are selected automatically, depending on the position of the shift lever. & ...

Yaw-rate and G Sensor Installation
1. Remove the ignition key from the vehicle. 2. Install inthe reverse order of removal. 3. After installing the ...

CVVT Oil Control Valve (OCV)
Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine ...

Copyright В© www.ksmanual.com 2014-2024