Component part |
Function |
Vehicle-speed sensor |
Converts vehicle speed to pulse. |
ECM |
Receives signals from sensor and control switches. |
Cruise control indicator |
Illuminate when CRUISE switch is ON (Built into cluster) |
Cruise Control switches |
ON/OFF switch |
Switch for automatic speed control power supply. |
RES+ switch |
Controls automatic speed control functions by Resume/Accel switch
(Set/Coast switch) |
SET- switch |
|
Cancel switches |
Cancel switch |
Sends cancel signals to ECM. |
Brake-pedal switch |
|
Transaxle range switch (A/T) |
|
ETC motor |
Regulates the throttle valve to the set opening by ECM. |
Seat Belt Pretensioner (BPT) Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
Front Driveshaft Components
1. Front driveshaft (LH)
2. Inner shaft bearing bracket
3. Front driveshaft (RH)
[LH]
1. BJ assembly
2. Clip
3. BJ boot band
4. BJ bo ...
IMS Power Seat Control Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...