Kia Sorento: Auto Defogging Sensor Description - Air conditioning System - Heating,Ventilation And Air Conditioning - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Auto Defogging Sensor Description

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Auto Defogging Sensor Description

The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator, blower motor rpm, and mode actuator.

Ambient Temperature Sensor Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer to Body - "Front Bumper") ...

Auto Defogging Sensor Inspection
To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide. ...

See also:

Component Location
1. Rear wiper arm & blade 2. Tailgate glass hole 3. Grommet 4. Rear wiper arm nut 5. Rear wiper motor assembly 6. Head cap 7. Rear wiper motor bolt ...

Wipers & Washers
A : Wiper speed control (front) MIST/ – Single wipe OFF / O – Off INT / --- – Intermittent wipe AUTO – Auto control wipe LO / 1 – Low wiper speed HI / 2 – High wiper speed B : In ...

Fuel Tank Pressure Sensor (FTPS)
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission control system and is installed on the fuel tank, the fuel pump, or the canister. It checks the purge control solen ...

Copyright www.ksmanual.com 2014-2025