Kia Sorento: Indicators And Gauges

ICM Relay Box Inspection

Rear Wiper Motor relay Check for continuity between the terminals. 1. There should be continuity between the No.1 and No.3 terminals when power and ground are conne ...

Component Location

1. Cluster assembly 2. Seat belt switch 3. Vehicle speed sensor 4. Engine coolant temperature sender 5. Oil pressure switch 6. Brake fluid level warning switch 7. Parking ...

See also:

Auto Head lamp leveling Unit Removal
Height Sensor & Unit 1. Disconnect the negative(-) battery terminal. 2. Remove the height sensor connector (A). ...

Cruise control system
1. Cruise indicator 2. Cruise set indicator The cruise control system allows you to program the vehicle to maintain a constant speed without pressing the accelerator pedal. This system is design ...

Power Mosfet (DATC) Inspection
1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be rep ...