Kia Sorento: Adjustment

Inspection

Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal. The horn should make a sound. If the horn fails to make a sound, replace it. Horn Relay Inspec ...

AVN System

...

See also:

Input/Output Specification
Connector Pin Lay Out IMS input/output pin information No Signal Name I/O Contents Remark A1 - - - ...

Blind Spot Detection Unit Installation
1. Install the BSD units to the rear bumper. 2. Install the rear bumper. 3. Connect the negative (-) battery te ...

Teaching Procedures
1. Key Teaching Procedure Key teaching must be done after replacing a defective PCM(ECM) or when providing additional keys to the vehicle owner. The procedu ...