Kia Sorento: Bumper - Body (Interior and Exterior) - Kia Sorento XM 2011-2020 Service ManualKia Sorento: Bumper

Second Generation XM (2011-2020) / Kia Sorento XM 2011-2020 Service Manual / Body (Interior and Exterior) / Bumper

Quarter Fixed Glass Installation
1. With a putt knife, scrape the old adhesive smooth to a thickness of about 2mm (0.08 in.) on the bonding surface around the entire quarter fixed glass flange. ...

Front Bumper Components
1. Front bumper cover 2. Front bumper lower stiffner 3. Front bumper upper stiffner 4. Front bumper side bracket ...

See also:

Transaxle Control Module (TCM) Installation
   When replacing the TCM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the ...

Passenger Airbag (PAB) Module Description
Passenger Airbag (PAB) module is located in the passenger crash pad. This PAB contains 2 firing squibs of airbag and 1 firing squib of active vent. Depending of crash speed or the tightening ...

Parking Assist Sensor Installation
1. Install the rear ultra sensor after connecting the connector. 2. Install the rear bumper cover. 3. Connect t ...

Copyright © www.ksmanual.com 2014-2020