Kia Sorento: Fuel Pump Removal
| 1. |
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release
Residual Pressure in Fuel Line")
|
| 2. |
Remove the rear seat.
(Refer to Body - “Rear Seat Assembly”)
|
| 3. |
Remove the fuel pump service cover (A).
|
| 4. |
Disconnect the fuel pump connector (A) and the fuel tank pressure
sensor connector (B).
|
| 5. |
Disconnect the fuel feed tube quick connector (C) and the vapor
tube quick-connector (D).
|
| 6. |
Remove locking ring (A) by using the special service tool.
|
| 7. |
Disconnector the vapor tube quck-connector (A) at the fuel pump,
and then remove the fuel pump from the fuel tank.
|
Fuel Pump Inspection
[Fuel pump motor]
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Remove the fuel pump assembly.
...
Fuel Pump Installation
1.
Install in the reverse order of removal.
Be careful of fuel pump direc ...
See also:
Immobilizer Control Unit Installation
1.
Install the immobilizer control unit after connecting the unit
connector.
2.
Install the crash pad lower panel.
...
Auto Head lamp leveling Unit Operation
Operating Procedure
1.
Suspension angle change resulted from vehicle's load change.
2.
Height sensor signal change
...
Valve Clearance Inspection And Adjustment
Inspect and adjust the valve clearance when the engine is cold (Engine
coolant temperature : 20°C (68°F)) and cylinder ...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026