Kia Sorento: Fuel Pump Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Sorento XM 2011-2020 Service ManualKia Sorento: Fuel Pump Installation

Second Generation XM (2011-2020) / Kia Sorento XM 2011-2020 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pump Installation

1.
Install in the reverse order of removal.
  
Be careful of fuel pump direction when installing (Refer to the groove in the fuel tank).
Fuel Pump Removal
1. Release the residual pressure in fuel line. (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line") ...

Fuel Filter Removal
1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). ...

See also:

3. TCM Terminal input/ output signal
Connector [A] Pin No. Signal Condition Type Level 29 Sports mode up switch Up ON Input 0V/Battery voltage level ...

Shift Cable Installation
1. Install in the reverse order of removal.    Set shift lever and inhibitor ...

SRS Control Module (SRSCM) Description
The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does not. The ...

Copyright © www.ksmanual.com 2014-2020