Kia Sorento: Front Impact Sensor (FIS) Components - SRSCM - Restraint - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Front Impact Sensor (FIS) Components

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Components

Front Impact Sensor (FIS) Description
The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of ...

Front Impact Sensor (FIS) Removal
   • Removal of the airbag must be performed according to the precautions/ procedures descr ...

See also:

Heated Steering wheel Inpection
1. Measure a resistance of NTC and Heated pad. A. NTC resistance(Black / Yellow, Black) - 10.0 kΩ ± 10% (25°C) ...

Seat warmer (if equipped)
The seat warmer is provided to warm the front seats during cold weather. With the ignition switch in the ON position, push either of the switches to warm the driver's seat or the front passeng ...

Front Driveshaft Removal and Installation
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Copyright © www.ksmanual.com 2014-2019