Kia Sorento: Ignition Switch Assembly

Start/Stop Button Inspection

1. It will be able to diagnose defects of Smart key with GDS quickly. GDS can operates actuator forcefully, input/output value monitoring and self diagnosis. ...

Inspection

1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Che ...

See also:

Temperature Control Actuator Replacement
[Driver's side] 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the driver's si ...

Relay Box (Passenger Compartment) Component Location
...

Adjustment
After replacing ETC module or ECM, the ETC adaptive value must be reset / relearned according to the following procedure. 1. Check DTC(s) and clear if exist. ...