Kia Sorento: Auto Head lamp leveling Unit Description

According to driving environment and loading state of vehicle, head lamp lighting direction is changed to keep the driver's visibility range and to protect the driver's vision from glare, aiming at safety driving.

Sensor mounting on the rear center arm drives the actuator mounting on the head lamp since sensing the input signal following the vehicle's statical changes.

Head lamp beam is automatically operated by chassis tilt.

Purpose of AHLS(Auto Headlamp Leveling System)

Auto Head lamp leveling Unit Circuit Diagram

...

Auto Head lamp leveling Unit Operation

Operating Procedure 1. Suspension angle change resulted from vehicle's load change. 2. Height sensor signal change ...

See also:

Cruise Control
The cruise control system is engaged by the cruise "ON/OFF" main switch located on right of steering wheel column. The system has the capability to cruise, coast, accelerate and res ...

Troubleshooting
Symptom Probable cause Remedy play in steering Loose yoke plug Retighten Loose steering gear mounting bolts Retighten L ...

BJ Boot Removal and Installation
1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft�) 2. Remove the TJ joint assembly. (Refe ...