Kia Sorento: Head lamp leveling Device

Auto Light Sensor Installation

1. Reconnect the auto light connector. 2. Install the auto light sensor. ...

Component Location

1. Head lamp leveling sensor & unit 2. Head lamp leveling actuator ...

See also:

Front Driveshaft Removal and Installation
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Transaxle Control Module (TCM) Installation
   When replacing the TCM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the ...

Compressor Inspection
1. Check the plated parts of the disc & hub assembly (A) for color changes, peeling or other damage. If there is damage, replace the clutch set. ...