Kia Sorento: Power Tailgate Latch Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Power Tailgate Module / Power Tailgate Latch Inspection
Power Tailgate Inspection With GDS
| 1. |
Check the power Tailgate module input/output value by using the
GDS. If the operation of power Tailgate module is abnormal, replace
power trunk drive unit.
|
| 2. |
To check the DTC of the power trunk module, select "PTM"
|
| 3. |
Select "Input/output monitoring".
|
Power Tailgate Latch Installation
1.
Install the power tailgate latch & PCU assembly.
2.
Install the tailgate trim.
3.
Connect the negative ( ...
Anti-Pinch Strip Removal
1.
Disconnect the negative (-) battery terminal.
2.
After loosening the mounting screws, then remove the tailgate
side trim (A).
(R ...
See also:
Fuel Filter Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Disconnect the fuel sender connector (A).
...
General
1.
Basically, all measurements in this manual are taken with a tracking
gauge.
2.
When a measuring tape is used, check to be sure there is ...
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If there
is no CKPS signal input, the engine may stop ...
Copyright © www.ksmanual.com 2014-2024