Kia Sorento: Power Door Lock Switch Installation
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Switch Installation
Driver Power Window Main Switch
| 1. |
Install the driver power window switch assembly and connectors.
|
| 2. |
Install the front door trim.
|
Passenger Window Switch
| 1. |
Install the passenger power window switch assembly and connectors.
|
| 2. |
Install the front door trim.
|
Power Door Lock Switch Removal
Driver Power Window Main Switch
1.
Disconnect the negative battery terminal.
2.
Remove the front door trim.
(Refer to Body - "F ...
Power Door Lock Switch Diagnosis With GDS
1.
It will be able to diagnose defects of door lock with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring
and self diagnosis.
...
See also:
Description
BSD is a system that uses two magnetic wave radar sensors attached on
the rear bumper to measure the distance from the following vehicles and provides
the sensing and (visual and auditory) al ...
Rear Cross Member Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Description
Evaporative Emission Control System prevents fuel vapor stored in fuel
tank from vaporizing into the atmosphere. When the fuel evaporates in the fuel
tank, the vapor passes through vent hoses ...
Copyright В© www.ksmanual.com 2014-2024