Kia Sorento: IPM Specifications - BCM (Body Control Module) - Body Electrical System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: IPM Specifications

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / BCM (Body Control Module) / IPM Specifications

Items
Specifications
Rated voltage
DC 12V
Operating voltage
DC 9 ~ 16V
Operating temperature
-30°C ~ 75°C (-4°F ~ 158°F)
Insulation resistance
RKE specificaiton : 5.5 mA
Smart key specificaiton : 3.0 mA
LIN communication specificaiton : 3.3 mA

※ Abbreviation
IPM : Intelligent intergrated Platform Module
DDM : Driver Door Module
ADM : Assist Door Module
IMS : Intergrated Memory System
SMK : Smart Key
BCM (Body Control Module)
...

IPM Components
Outer Connector (L / M / N / K) Connector Pin No. Description Active Remark K 1 IMS LIN     ...

See also:

Steering Angle Sensor
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning directio ...

4WD ECU Circuit Diagram
...

Rear Air Conditioner Unit Components
1. Rear Heater Case (LH) 2. Rear Heater Case (RH) 3. Lower Case 4. Drain Hose 5. Rear Evaporator Core 6. Refrigerant Line 7. Flange Lining 8. O-Ring 9. Rear ...

Copyright www.ksmanual.com 2014-2026