Kia Sorento: Speakers Replacement - Audio - Body Electrical System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Speakers Replacement

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body Electrical System / Audio / Speakers Replacement

Front Speaker
1.
Remove the front door trim.
(Refer to Body - "Front door")
2.
Remove the front speaker (A) after removing the mounting screws.

Rear Speaker
1.
Remove the rear door trim.
(Refer to Body - "Rear door")
2.
Remove the rear speaker (A) after removing the mounting screws.

Crash Pad Center Speaker
1.
Remove the center fascia panel (A).

2.
Remove the crash pad center speaker grill (A).

3.
Remove the crash pad center speaker (A) after loosening the mounting screws (2EA).

Tweeter Speaker (Front)
1.
Remove the front door delta cover (A).
(Refer to Body - "Front door")

2.
Remove the tweeter speaker (A) after disconnecting the connector.

Woofer Speaker
1.
Remove the left luggage side trim.
(Refer to Body - "Interior trim")
2.
Remove the woofer speaker connector (A).

3.
Remove the woofer speaker (A) after removing 4 nuts.

Surround speaker
1.
Remove the luggage side trim.
(Refer to Body - "Interior trim")
2.
Remove the rear pillar trim.
(Refer to Body - "Interior trim")
3.
Remove the surround speaker (A) after removing 2 nuts.

Speakers Inspection
1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the s ...

Speakers Installation
Front speaker 1. Install the speaker to the speaker mounting hole in the door in-panel. 2. Reconnect the speaker connector. Rea ...

See also:

Record your key number
The key code number is stamped on the key code tag attached to the key set. Should you lose your keys, this number will enable an authorized Kia dealer to duplicate the keys easily. Remove the key ...

Components Location
1. AVN (A/V & Navigation) head unit 2. Tweeter speaker 3. External amplifier 4. Roof antenna (Radio+Sirius+GPS) 5. Front door speaker 6. Rear door speaker 7. Subwo ...

Intake Manifold Removal and Installation
1. Disconnect the battery negative terminal. 2. Remove the air cleaner assembly. (Refer to Intake And Exhaust System - "Air Cleaner ...

Copyright www.ksmanual.com 2014-2025