Kia Sorento: Speakers Installation
Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Body Electrical System / Audio / Speakers Installation
Front speaker
| 1. |
Install the speaker to the speaker mounting hole in the door in-panel.
|
| 2. |
Reconnect the speaker connector.
|
Rear speaker
| 1. |
Install the speaker to the speaker mounting hole in the door in-panel.
|
| 2. |
Reconnect the speaker connector.
|
Crash pad center speaker
| 1. |
Reconnect the connector to the center speaker.
|
| 2. |
Install the center speaker.
|
| 3. |
Install the crash pad center speaker grill.
|
Tweeter speaker (Front)
| 1. |
Install the front tweeter speaker to the front door delta cover.
|
| 2. |
Reconnect the connector and then install the delta cover.
|
Woofer speaker
| 1. |
Install the woofer speaker to the left quarter inner panel.
|
| 2. |
Reconnect the connector
|
| 3. |
Install the left luggage side trim.
|
Surround speaker
| 1. |
Install the surround speaker and connect the connector.
|
| 2. |
Install the rear pillar trim.
|
| 3. |
Install the luggage side trim.
|
Speakers Replacement
Front Speaker
1.
Remove the front door trim.
(Refer to Body - "Front door")
2.
Remove the front speaker (A) after removing ...
Antenna Inspection
Antenna Cable
1.
Remove the antenna jack from the audio unit and antenna.
2.
Check for continuity between the center poles of antenna cable. ...
See also:
Vehicle load limit
Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number
of people tha ...
Component Location
1. Battery
2. AC inverter switch
3. AC inverter unit
4. AC inverter outlet
...
Canister Close Valve (CCV)
Canister Close Valve (CCV) is installed on the canister ventilation line.
It seals evaporative emission control system by shutting the canister from the
atmosphere when leakage detecting syst ...
Copyright © www.ksmanual.com 2014-2019