Kia Sorento: Audio Unit Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Audio / Audio Unit Installation

1.	Connect the audio unit connectors and cable.

2.	Install the audio unit.

3.	Install the center facia panel.

4.

Connect the negative (-) battery terminal.

A.	Make sure the connector are connected in properly.

B.	Check the audio system.

Audio Unit Removal

Put on gloves to protect your hands. ...

Speakers Inspection

1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the s ...

See also:

Cowl Top Cover Replacement
1. Remove the cap (A) and remove the nuts, then remove the wiper arm (B). Tightening torque : 22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ ...

Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal propo ...

Engine Mounting Components
1. Transaxle mounting bracket 2. Roll rod bracket 3. Engine mounting bracket 4. Engine mounting support bracket ...

Categories

Copyright © www.ksmanual.com 2014-2026