Kia Sorento: Removal - Back View Camera System - Body Electrical System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Removal

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Body Electrical System / Back View Camera System / Removal

1.
Remove the tailgate trim in the trunk after removing the screws and clips.
(Refer to Body - "Tailgate")
2.
Remove the tailgate garnish (A) after disconnecting the connector.

3.
Remove the back view camera (A) after removing the screws (2EA).

Description
Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehic ...

Installation
1. Install the back view camera. 2. Install the tailgate garnish and trim. ...

See also:

Heater Unit Replacement
1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/recycling/charging station. 3. ...

Oil Pan Removal
1. Remove the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the A/C compressor. (Refer to Heating, Ve ...

Cylinder Head Inspection
Cylinder Head 1. Inspect for flatness. Using a precision straight edge and feeler gauge, measure the surface the contacting the cylinder block and the manifolds fo ...

Copyright © www.ksmanual.com 2014-2019