Kia Sorento: Trailer brakes
If your trailer is equipped with an independent braking system, verify that it fully complies with all regional vehicle regulations and is correctly wired, adjusted, and functioning flawlessly before every trip.
If your trailer exceeds the maximum weight threshold established for unbraked loads, it must feature its own adequate braking system. Carefully read, understand, and follow the manufacturer instructions accompanying your trailer brakes to ensure proper installation, routine adjustment, and ongoing maintenance.
Never attempt to splice into or tap directly into your Kia Sorento's primary hydraulic brake system lines.
NOTE
Trailer brakes
Do not use a trailer equipped with its own braking system unless you are completely confident that the brake controller and actuator setup have been professionally and accurately configured. Integrating trailer brake systems is complex technical work best left to experienced, competent automotive and trailer service specialists.
Installation
...
Purge Control Solenoid Valve (PCSV)
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and
controls the passage between the canister and the intake manifold. It is a solenoid
valve and is open when the ECM groun ...
Front Impact Sensor (FIS) Description
The front impact sensor (FIS) is installed in the Front End Module (FEM).
They are remote sensors that detect acceleration due to a collision at its mounting
location. The primary purpose of ...