Kia Sorento: TPMS Receiver On Vehicle Inspection. TPMS Receiver Repair procedures - Tire Pressure Monitoring System - Suspension SystemKia Sorento: TPMS Receiver On Vehicle Inspection. TPMS Receiver Repair procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Suspension System / Tire Pressure Monitoring System / TPMS Receiver On Vehicle Inspection. TPMS Receiver Repair procedures

TPMS Receiver On Vehicle Inspection

On Vehicle Inspection
1.
Save the vehicle code, VIN, and sensor ID in the receiver and check whether it is properly stored.
2.
Check that the status of the TPMS receiver (BDC, Body Domain Control) unit is in normal operation.
3.
Check whether the TPMS warning light is off and DTC code.

TPMS Receiver Repair procedures

Removal
Note
The TPMS receiver is integrated with the Body Domain Control (BDC) unit, so replace the BDC unit.
1.
Remove the body domain control unit.
(Refer to Body Electrical System - Body Domain Control Unit")
Installation
1.
Install in the reverse order of removal.
TPMS Receiver Description and Operation
Description TPMS monitors the pressure and temperature of tires to warn of pressure changes that may affect driving conditions. The messages calculated from the processed data are show...
TPMS Sensor Description and Operation
Description 1. Function • TP...
See also:

Rear Assist Arm Repair procedures
Removal 1. Disconnect the (-) battery terminal. 2. Remove the rear wheel and t ...

Direct Electro Hydraulic Actuator Coupling Removal
   Coupling Maintenance Precautions Maintain the coupling at a horizontal level. ...

Front Disc Brake Replacement
Front brake pads 1. Loosen the guide rod bolt (B) and then remove caliper body (A). 2. Replace pad shim (D), pad retainers (C) and b ...

Copyright © www.ksmanual.com 2014-2026 - 0.0641