- |
Refer to BE group - inspection / self diagnosis with scan tool.
|
- |
Refer to BE group - inspection / self diagnosis with scan tool.
|
- |
Refer to BE group - inspection / self diagnosis with scan tool.
|
1. |
Check for continuity between the tailgate latch terminals.
|
2. |
If continuity is not specified, inspect the switch
|
Front Fog Lamps Installation
1.
Install the front fog lamp bulb.
2.
Connect the fog lamp connector.
3.
Install the front tire wheel guard.
...
Shift Cable Installation
1.
Install in the reverse order of removal.
Set shift lever and inhibitor ...
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil
...