Kia Sorento: Removal - Horn - Body Electrical System - Kia Sorento XM 2011-2023 Service ManualKia Sorento: Removal

Second Generation XM (2011-2023) / Kia Sorento XM 2011-2023 Service Manual / Body Electrical System / Horn / Removal

1.
Remove the head lamp.
(Refer to "Lighting system")
2.
Remove the bolts and disconnect the horn connectors, then remove the high pitch horn (A) and low pitch horn (B).

Component Location
1. Horn switch 2. Horn relay (Engine room compartment) 3. Horn (Low pitch) 4. Horn (High pitch) 5. Clock spring ...

Installation
1. Install the horns after connecting the horn connectors. 2. Install the head lamp. (Refer to "Lighting system") ...

See also:

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the engine coolant temperature sensor connecto ...

Temperature Control Actuator Replacement
[Driver's side] 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the driver's si ...

Hands Free Switch Inspection
1. Check the handsfree remote control switch for resistance between No.2 and No.5 terminals in each switch position. [Call + Hang Up] Switch ...

Copyright В© www.ksmanual.com 2014-2023