Kia Sorento: Rear Upper Arm Repair procedures

Removal

1.	Disconnect the (-) battery terminal.

2.	Remove the rear wheel and tire. (Refer to Tires/Wheels - "Wheel")

Remove the bolts (A), nuts (B) and washer (C) and remove the rear upper arm (D).

Tightening torque :

156.9 - 176.5 N·m (16.0 - 18.0 kgf·m, 115.7 - 130.2 lb·ft)

Suspension System — Rear Suspension System / Rear Upper Arm / Repair procedures / Removal illustration

•	When removing the bolt, install the transmission jack and remove it under no load.

•	Mark the bolt, nut and washer in advance so that they do not change position and orientation.

Inspection

1.	Check the bushing for wear and deterioration.

2.	Check the rear upper arm for deflection or damage.

3.	Check the all bolts and nuts.

Installation

1.	Install in the reverse order of removal.

2.	Check the alignment. (Refer to Suspension System - "Alignment")

Removal 1. Disconnect the (-) battery terminal. 2. Remove the rear wheel and tire. (Ref...

Removal 1. Disconnect the (-) battery terminal. 2. Remove the rear wheel and tire. (Ref...

Manuals list