Kia Sorento: Rear Seat Unit Repair Procedures - Seat Electrical - Body Electrical SystemKia Sorento: Rear Seat Unit Repair Procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Body Electrical System / Seat Electrical / Rear Seat Unit Repair Procedures

Removal
Rear Seat Heater Unit
1.
Remove the rear seat assembly.
(Refer to Body - "Rear Seat Assembly")
2.
Disconnect the seat heater unit connector (A).

Body Electrical System — Seat Electrical / Rear Seat Unit / Repair Procedures / Removal illustration

3.
Remove the seat heater unit (A) after removing the screws.

Body Electrical System — Seat Electrical / Rear Seat Unit / Repair Procedures / Removal illustration

Rear Seat Folding Actuator
1.
Remove the rear seat back cover.
(Refer to Body - "Rear Seat Back Cover")
2.
Remove the rear seat cushion cover.
(Refer to Body - "Rear Seat Cushion Cover")
3.
Disconnect the folding actuator cable (A).
[5 / 7P]

Body Electrical System — Seat Electrical / Rear Seat Unit / Repair Procedures / Removal illustration

Body Electrical System — Seat Electrical / Rear Seat Unit / Repair Procedures / Removal illustration

[6P]

Body Electrical System — Seat Electrical / Rear Seat Unit / Repair Procedures / Removal illustration

Body Electrical System — Seat Electrical / Rear Seat Unit / Repair Procedures / Removal illustration

4.
Disconnect the folding actuator connector (A).
[5 / 7P]

Body Electrical System — Seat Electrical / Rear Seat Unit / Repair Procedures / Removal illustration

[6P]

Body Electrical System — Seat Electrical / Rear Seat Unit / Repair Procedures / Removal illustration

5.
Remove the folding actuator (A) after removing the screws.
[5 / 7P]

Body Electrical System — Seat Electrical / Rear Seat Unit / Repair Procedures / Removal illustration

Body Electrical System — Seat Electrical / Rear Seat Unit / Repair Procedures / Removal illustration

[6P]

Body Electrical System — Seat Electrical / Rear Seat Unit / Repair Procedures / Removal illustration

Body Electrical System — Seat Electrical / Rear Seat Unit / Repair Procedures / Removal illustration

Installation
1.
Install in the reverse order of removal.
2.
Perform Over The Air (OTA) controller S/W update with KDS.
(Refer to Security and Vehicle Ignition System - "Over The Air (OTA)")
Rear Seat Switch Repair Procedures
Removal Front Seat (Passenger) 1. Disconnect the battery negative ( - ) terminal. 2. Remove the...
Power Seat Motor Repair Procedures
Removal Reclining Motor 1. Remove the front seat back cover assembly. (Refer to Body - "Front Seat Back Cover") ...
See also:

Fluid Component Location
1. ATF Injection hole(eyebolt) 2. Oil level plug 3. Oil drain plug ...

Clock Spring Removal
Removal 1. Remove the steering wheel. (Refer to Steering System - "Steering Wheel") ...

Description and Operation
Description System Overview System characteristics : – Changing the state of powe ...

Copyright © www.ksmanual.com 2014-2026 - 0.0648