Kia Sorento: Rear Seat Switch Repair Procedures

Removal

Front Seat (Passenger)

1.	Disconnect the battery negative ( - ) terminal.

2.	Remove the walk-in switch (A).

3.	Disconnect the work-in switch connector (A).

Seat Back Walk-in Switch

1.	Disconnect the battery negative terminal.

2.	Remove the seat back walk-in switch (A).

3.	Disconnect the seat back walk-in switch connector (A).

Seat Cushion Walk-in Switch

1.	Disconnect the battery negative terminal.

2.	Remove the recliner lever cap (A).

3.	Remove the recliner lever (A) after removing the bolt.

4.	Remove the seat cushion lever garnish (A) after removing the screw.

5.	Remove the seat cushion walk-in switch (B) by removing the screw after disconnecting the connector (A).

Remote Folding Switch

1.	Remove the luggage side trim. (Refer to Body - "Luggage Side Trim")

Remove the remote folding switch (A).

Body Electrical System — Seat Electrical / Rear Seat Switch / Repair Procedures / Removal illustration

Clip position :

Body Electrical System — Seat Electrical / Rear Seat Switch / Repair Procedures / Removal illustration

Installation

1.	Install in the reverse order of removal.

Inspection Driver/Passenger Seat Heater 1. Check for continuity and measure the resistance between terminals. ...

Removal Rear Seat Heater Unit 1. Remove the rear seat assembly. (Refer to Body - "Rear Seat Assembly") ...

Manuals list