Kia Sorento: Rear Hub - Carrier Inspection

Rear Hub - Carrier Disassembly

1. Remove the hub assembly mounting bolts (A-4ea) from the rear axle carrier (B). Tightening torque: 78.5 ~ 88.3N.m (8.0 ~ 9.0 ...

Rear Driveshaft Assembly

...

See also:

Rear Wiper Motor Installation
1. Install the rear wiper motor assembly. Tightening torque Nut : 7 ~ 11 N.m (0.7 ~ 1.1 kgf.m, 5 ~ 7.9 lbf-ft) ...

Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC curre ...

Yaw-rate and G Sensor Description
The yaw rate and G sensor is included inside the air bag control module (SRSCM). When the vehicle is turning with respect to a vertical axis the yaw rate sensor detects the yaw rate elec ...