Kia Sorento: Rear Bumper Beam Assembly Repair Procedures
Kia Sorento (MQ4, 2021-2026) Service Manual / Body (Interior and Exterior) / Bumper (Rear) / Rear Bumper Beam Assembly Repair Procedures
| Removal and Installation |
| 1. |
Remove the rear bumper assembly.
(Refer to Bumper (Rear) - "Rear Bumper Assembly")
|
| 2. |
Remove the rear bumper wiring harness clips (A).
|
| 3. |
Remove the rear bumper beam assembly (A) after removing the clips.
|
| 4. |
Install in the reverse order of removal.
|
Removal and Installation
Rear Bumper Assembly
1.
Disconnect the battery negative ( - ) terminal.
2.
...
Rear Bumper Assembly Repair Procedures
Repair Procedures
Removal
1.
Remove the front wiper arm.
(Refer to Body Electrical System - "Wiper Arm")
...
Cowl Top Cover
See also:
Delivery Pipe Removal and Installation
Removal
Low Pressure Delivery Pipe
1.
Release the residual pressure in fuel line.
(Refer to ...
Cooling Fan Disassembly
1.
Remove the cooling fan (A) after loosening the screws (B) from the cooling
assembly.
Tightening torque:
2.7 ~ 3.2 N.m (0.28 ~ 0.3 ...
Troubleshooting
Symptom
Suspect Area
Remedy (Refer to page)
Water leaks from panorama sunroof
Deteriorated roof lid weatherstrip
Replace
Excessive roof lid ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0658