Kia Sorento: Position Switch Removal
Kia Sorento (MQ4, 2021-2026) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Position Switch Removal
| Removal |
| 1. |
Shift the shift lever to the N range.
|
| 2. |
Disconnect the battery negative ( - ) terminal.
|
| 3. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
| 4. |
Disconnect the position switch connector (A).
|
| 5. |
Remove the shift cable after removing the nut (A).
|
| 6. |
Remove the manual control lever (B) and the washer after removing a nut (A).
|
| 7. |
Remove the position switch (A) after removing the bolts.
|
Inspection
...
Position Switch On Vehicle Inspection
Installation
1.
Check that the gear is shifted to N.
2.
Install the position switch (A).
...
Position Switch Installation
See also:
Rear Shock Absorber Removel
2WD
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 ...
Catalytic Converter Removal
1.
Remove the exhaust manifold.
(Refer to Engine Mechanical System - "Exhaust Manifold")
...
Engine compartment
1. Engine coolant reservoir
2. Engine oil filler cap
3. Brake fluid reservoir
4. Air cleaner
5. Fuse box
6. Positive battery terminal
7. Negative battery terminal
8. Windshield washer fluid r ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0776