Kia Sorento: Position Switch On Vehicle Inspection
|
Inspect the following items by referring to inspection flow chart.
(Refer to Position Switch - "Troubleshooting")
|
| 1. |
Check the diagnostic trouble codes (DTC) using KDS.
|
| 2. |
Check that "N" range setting matches.
(Refer to Position Switch - "Installation")
|
| 3. |
Check the free play for shift cable.
(Refer to Shift Cable - "Installation")
|
| 4. |
Check the condition of connector.
| (1)
|
Inspect connector thoroughly for looseness, poor connection, bending, corrosion, contamination,
deformation, or damage.
|
| (2)
|
Measure the voltage between the power supplied to position switch circuit and ground.
Specification : Approx. 12 V
|
|
|
| 5. |
Inspect the ground of rear combination lamp circuit.
|
| 6. |
Inspect the wiring connection of junction box power terminal and fuse lamp.
| (1)
|
Check for separation of fuse holder and check that the holder is tightly holding the fuse.
|
| (2)
|
Attach tester fuse to check that it is connected properly.
|
| (3)
|
Check if fuse is damaged.
|
|
| 7. |
Check the inhibitor switch circuit signal.
| (1)
|
Turn Ignition "ON", and engine "OFF".
|
| (2)
|
Measure the PWM output at each range (P, R, N, D).
|
Specification : Refer to table below
|
Signal(Pin)
|
PWM output value (%)
|
P
|
R
|
N
|
D
|
S1 (7)
|
10.0 - 30.7
|
37.6 - 56.9
|
59.1 - 74.3
|
76.5 - 90.0
|
S2 (8)
|
69.8 - 90.0
|
43.1 - 62.4
|
25.7 - 40.9
|
10.0 - 23.5
|
|
Position Switch Description and Operation
Description
•
The position switch signals delivered at the TCM according...
Removal
1.
Shift the shift lever to the N range.
...
See also:
Smart Cruise Control (SCC)
Basic function
The advanced Smart Cruise Control system in the Kia Sorento is engineered to seamlessly detect vehicles traveling
ahead, helping you maintain a secure, pre-set following distance ...
Using a child restraint system
For small children and babies, the use of a child seat or infant seat is required.
The child seat or infant seat should be of appropriate size for the child and should
be installed in accordance w ...
Transaxle Control Module (TCM) Description
Transaxle Control Module (TCM) is the automatic transaxle's brain. The
module receives and processes signals from various sensors and implements a
wide range of transaxle controls to ensu ...
Position Switch Description and Operation. Position Switch Troubleshooting
Position Switch Removal
