Kia Sorento: Position Switch Installation

Installation

1.	Check that the gear is shifted to N.

Install the position switch (A).

Lightly tighten the inhibitor switch mounting bolts so that necessary adjustments can be made.

Automatic Transaxle System — Automatic Transaxle Control System / Position Switch / Installation illustration

Install the manual control lever (A) and washer.

Lightly tighten the manual control lever nut so that necessary adjustments can be made.

Automatic Transaxle System — Automatic Transaxle Control System / Position Switch / Installation illustration

4.	Align the hole in the manual control lever with the "N" position hole of the position switch and then insert the SST position switch guide pin (09480 - A3800).

Tighten the manual control lever nut (A) with the specified torque.

Tightening torque :

17.7 - 24.5 N·m (1.8 - 2.5 kgf·m, 13.0 - 18.1 lb·ft)

Automatic Transaxle System — Automatic Transaxle Control System / Position Switch / Installation illustration

Tighten the position switch bolts (A).

Tightening torque :

9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft)

Automatic Transaxle System — Automatic Transaxle Control System / Position Switch / Installation illustration

Tighten the nut (A) with the specified torque after removing free play by pushing the shift cable in the direction of the arrow.

Tightening torque :

9.8 - 14.7 N·m (1.0 - 1.5 kgf·m, 7.2 - 10.8 lb·ft)

Automatic Transaxle System — Automatic Transaxle Control System / Position Switch / Installation illustration

8.	Remove the SST (09480 - A3800).

9.	Connect the position switch connector (A).

10.	Install the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner")

Removal 1. Shift the shift lever to the N range. ...

Component 1. Manual Lever Assembly1-a. 8.8 - 13.7 N·m (0.9 - 1.4 kgf·m, 6.5 - 10.1 lb·ft) 2. Snap Pin3. Shift Cable Assembly...

Manuals list