Kia Sorento: Outside rearview mirrorYour Kia Sorento is equipped with both left and right outside rearview mirrors designed to provide optimal visibility and safety on the road.
Be sure to thoroughly check and adjust the mirror angles to suit your seating position before driving off.
You can adjust the mirrors remotely using the interior control levers or the electronic switch depending on the specific mirror control package installed in your vehicle. Additionally, you can fold the mirror housings inward toward the body to prevent accidental damage when entering an automatic car wash or when navigating narrow, congested city streets.
NOTE
Rearview mirrors
The exterior outside rearview mirror glass is convex by design. Because of this curvature, objects and vehicles seen reflected in the mirror are actually much closer than they appear.
Always cross-check with your interior rearview mirror or rely on direct shoulder observation to accurately determine the true distance of following vehicles before executing any lane changes in your Kia Sorento.
NOTE
Never attempt to scrape accumulated ice directly off the mirror face with sharp objects, as scraping will severely scratch and damage the surface of the glass. If ice restricts the mirror’s movement, do not force the motorized mechanism to adjust its position. To clear ice safely, use an approved automotive de-icer spray or apply warm water with a sponge or soft cloth.
TIP
If the mirror mechanism is jammed with frozen ice, do not attempt to force it into motion. Use an approved spray de-icer (never use radiator antifreeze) to quickly release the frozen mechanical components, or relocate your Kia Sorento to a heated indoor garage and allow the ice to melt naturally.
WARNING
Never attempt to manually adjust or fold the outside rearview mirrors while the vehicle is actively moving. Doing so introduces severe distractions and could result in a dangerous crash leading to serious personal injury or death.
Digital center mirror: (if equipped)
Adjusting the outside rearview mirrorsSpecification
Item
Specification
Rated Voltage
DC 12.0V
Operating voltage
DC 10.7 ~ 15V
Operating temperature
-30 ~ 75°C (-22 ~ 167°F)
...
Under Body (2WD)
Projected Dimensions
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Actual-Measurement Dimensions
...
Propeller Shaft Removal and Installation
1.
After making a match mark on the flange yoke and transfer companion,
remove the propeller shaft mounting bolts (A).
Tightening torque:
...