Kia Sorento: Ignition System
Kia Sorento (MQ4, 2021-2026) Service Manual / Engine Electrical System / Ignition System
- Description and Operation
- Troubleshooting
- On Vehicle Inspection
- Ignition Coil Specifications
- Ignition Coil Description and Operation. Ignition Coil Troubleshooting
- Ignition Coil Removal and Installation
- Spark Plug Specifications. Spark Plug Description and Operation
- Spark Plug Troubleshooting
- Spark Plug On Vehicle Inspection
- Spark Plug Removal and Installation
- Spark Plug Cleaning
Removal
1.
Disconnect the battery negative ( - ) terminal (A) by loosening the mounting nut after disconnecting the
connector (B).
...
Battery Sensor Removal and Installation
Description
•
Ignition timing is controlled by the electronic control ignition timing system.
...
Description and Operation
See also:
Mode Control Actuator Description
The mode control actuator is located at the heater unit.
It adjusts the position of the mode door by operating the mode control
actuator based on the signal of the A/C control unit. Pressing ...
Fuel Pump Installation
1.
Install in the reverse order of removal.
Be careful of fuel pump direc ...
Output Speed Sensor Description
The output speed sensor (A) is a vital unit that measures the rate of
rotation of the transaxle's turbine shaft and output shaft, and delivers the
readings to the Transaxle Control Module ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0477