Kia Sorento: Ignition Coil Removal and Installation

Kia Sorento (MQ4, 2021-2026) Service Manual / Engine Electrical System / Ignition System / Ignition Coil Removal and Installation

Removal

1.	Disconnect the battery negative ( - ) terminal.

2.	Remove the engine cover. (Refer to Engine Mechanical System - " Engine Cover")

3.	Disconnect the ignition coil connector (A).

4.	Remove the engine foam (A).

Remove the ignition coil mounting bolts (A).

Tightening torque :

9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft)

Engine Electrical System — Ignition System / Ignition Coil / Removal and Installation / Removal illustration

6.	Remove the ignition coil (A).

Installation

Install in the reverse order of removal.

•	Install ignition coil to the specified torque.

•	If the ignition coil is dropped, it may cause internal damage. (Do not reuse)

•	When assembling the parts, clean the contaminated area (A) with the cloth. - The cloth should be clean, free of contaminants, and soft enough to not damage the parts. (When replacing ignition coil and spark plug together, cleaning is not required.)

Ignition Coil Description and Operation. Ignition Coil Troubleshooting

Ignition Coil Description and Operation Description An ignition coil is an induction coil in an engine's ignition system which transforms the battery's low ...

Spark Plug Specifications. Spark Plug Description and Operation

Spark Plug Specifications Specification Item Specification Type SILZKR7K11S ...

Kia Sorento: Ignition Coil Removal and Installation

See also:

Manuals list