Housing |
Pin |
Function |
Wire color |
Pad |
A |
GND |
Back |
B |
HEATER |
Yellow |
|
C |
NTC+ |
Back / Yellow |
|
D |
NTC- |
Back |
|
Remote control |
A |
GND |
Back |
B |
BAT |
Red |
|
C |
LED |
Green |
|
D |
SWITCH |
White |
Alternator Removal
1.
Disconnect the battery negative terminal.
2.
Disconnect the air compressor connector (A) and the alternator
connector (B), and remove th ...
Intake Manifold Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner ...
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cov ...