1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
|
2. |
Disconnect the fuel sender connector (A).
|
3. |
Release the fixing hooks, and then remove the fuel sender (A).
|
4. |
Release the fixing hooks (A), and then fuel filter & motor assembly
from reservoir cup.
|
Oil Pressure Switch Inspection
1.
Check the continuity between the terminal and the body with an ohmmeter.
If there is no continuity, replace the oil pressure switch.
2.
...
Seat Belt Buckle Switch (BS) Description
The SRSCM shall monitor the status of the driver and front passenger seat
belt buckle. The SRSCM provides one pin each for the driver and front passenger
seat belt buckle status input. The se ...
Specifications
Direct control VFS[OD/C]
▷ Control type : Normal high type
Control Pressure kpa
(kgf/cm², psi)
539.370 ~ 0 ( 5.5 ~ 0, 78.23 ~ 0)
Current value(mA)
...