1. |
Remove the front wheel and tire (A) from front hub .
|
2. |
Loosen the bolt & nut and then remove the lower arm (A).
|
3. |
Remove the front lower arm (C) and than loosen the bolts (A,B)
& nuts.
|
4. |
Installation is the reverse of removal.
|
5. |
Check the wheel Alignment.
(Refer to Tires/Wheels - "Alignment")
|
Specifications
Direct control VFS[LINE Pressure]
▷ Control type : Normal high type
Control Pressure kpa
(kgf/cm², psi)
539.370 ~ 0 ( 5.5 ~ 0, 78.23 ~ 0)
Current va ...
Manual transaxle (If equipped)
Manual transaxle operation
The manual transaxle has 6 forward gears.
This shift pattern is imprinted on the shift knob. The transaxle is fully synchronized
in all forward gears so shifting to eit ...