Kia Sorento: Roof Antenna Components

External Amplifier Installation

External Amplifier 1. Install the external amplifier after connecting the connector. 2. Install the passenger seat assembly. ...

Roof Antenna Removal

1. Remove the rear roof trim. (Refer to Body - "Roof Trim Assembly") 2. Disconnect the power cable (A). ...

See also:

Purge Control Solenoid Valve (PCSV)
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM groun ...

Inspection
Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal. The horn should make a sound. If the horn fails to make a sound, replace it. Horn Relay Inspec ...

Direct Electro Hydraulic Actuator Coupling Installation
1. Install in the reverse order of removal.    • ...