As a safety measures, mode is changed automatically when steering
wheel operation is done.
|
• |
First input : Display the current mode on cluster. (4 seconds)
|
• |
Add input (4 seconds) : Mode is changed sequentially.
|
• |
Three steering modes
|
Brake Pedal Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the crash pad lower panel and reinforce panel.
...
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing ...
Windshield Wiper-Washer Switch Inspection
Check for continuity between the terminals while operating the wiper and
washer switch. If it is not normal condition, replace wiper and wiper switch.
Wiper Switch
Washer Switch
R ...