Kia Sorento: Description and Operation
| Description and Operation |
The component of the air conditioner is basically as shown in the figure below. As the refrigerant circulates
between each part, it continuously changes to liquid→gas→liquid, creating a cooling effect.
|
•
|
Evaporator : Atomized refrigerant evaporates into gas while taking heat away from the surroundings
the action of the blower fan. (The surroundings will be cooled.)
|
|
•
|
Blower : Feeds air in the vehicle under pressure to the evaporator and feeds cooled air into the
vehicle.
|
|
•
|
Expansion valve : Allows the refrigerant to rapidly expand into low pressure and low temperature
liquid. (atomized)
|
|
•
|
Compressor : Low pressure (low temperature) gas into high pressure (high temperature) gas and
supply it to the condenser.
|
|
•
|
Condenser : This is installed in front of the radiator, It cools high pressure and high temperature
refrigerant to it's condensation point and returns it to high pressure liquid.
|
|
•
|
Receiver drier : This is a single body type with the condenser and installed at the side of the
condenser, It stores refrigerant and removes water and foreign material in the refrigerant.
|
|
Precaution (R-134a)
When Handling Refrigerant
1.
R-134a liquid refrigerant is highly volatile. A drop on the skin of your hand could result in localize...
Refrigerant Recovery/Recycling/Charging/Vacuum/Leak Test (R-134a)
Equipped with R-134a recovery/recycling/charging equipment
1.
Connect the R-1...
See also:
Troubleshooting
Troubleshooting
Problem Symptoms Table
Use the table below to help you find the cause of the problem. The numbers indicate the priority of ...
Position Switch On Vehicle Inspection
Inspection
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Remove the resonator and the air intake hose.
(Re ...