Kia Sorento: Crankshaft Position Sensor (CKPS) Specifications. Crankshaft Position Sensor (CKPS) Description and Operation
Crankshaft Position Sensor (CKPS) Specifications
| Specification |
|
Item |
Specification |
|
Operating voltage (V) |
4.75 - 5.25 |
|
Current consumption (mA) |
Maximum 14 |
Crankshaft Position Sensor (CKPS) Description and Operation
| Description |
| • |
Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors
of the engine control system.
|
| • |
If there is no CKPS signal input, fuel is not supplied. That is, vehicle can't run without CKPS
signal.
|
| • |
This sensor is installed on the cylinder block or the transaxle housing and generates alternating current
by magnetic flux field which is made by the sensor and the target wheel when engine runs.
|
| • |
The target wheel consists of 58 slots and 2 missing slots on 360 degrees Crank Angle (CA).
|
Camshaft Position Sensor (CMPS) Removal and Installation
Crankshaft Position Sensor (CKPS) On Vehicle Inspection
See also:
Good driving practices. Moving up a steep grade from a standing start
Never move the gear shift lever from P (Park) or N (Neutral) to any other position with the accelerator pedal
engaged.
Never move the gear shift lever ...
Operating Door Locks with the Smart Key. Using the Mechanical Key Emergency Access
Operating Door Locks with the Smart Key
The keyless entry system in the Kia Sorento allows you to seamlessly lock or unlock all side doors and the rear
liftgate without removing the transmitter ...
Engine Room Under Cover Repair procedures. Engine Mounting Components and Components Location
Engine Room Under Cover Repair procedures
Removal and Installation
Enigne Room Under Cover
1.
Remove th ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
