Kia Sorento: Brake Booster Inspection - Brake System - Brake System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Brake Booster Inspection

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Brake System / Brake System / Brake Booster Inspection

1.
Inspect the check valve in the vacuum hose, intensifier and the connecting section.
  
Do not remove the check valve from the vacuum hose.
2.
Check the boot for damage.
Brake Booster Removal
1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly. G 2.4 GDI (Refer to ...

Brake Booster Installation
1. Installation is the reverse of removal.    • ...

See also:

Inspection (With GDS)
1. Check IPM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch. ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS)
Overdrive clutch control solenoid valve(OD/C) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the overdrive clutch. ...

Dynamic Damper Installation
1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper. 2. Install the dynamic damper. ...

Copyright www.ksmanual.com 2014-2026