Kia Sorento: Battery saver function - Lighting - Driver AdjustmentsKia Sorento: Battery saver function

Kia Sorento (MQ4, 2021-2026) Owner's Manual / Driver Adjustments / Lighting / Battery saver function

The purpose of this feature is to prevent the battery from discharging if the lights are left ON. The function automatically shuts off the parking lights once the engine is off and the driver’s door is opened.

The position lamps, however, will stay ON if you operate the light switch after turning the engine OFF, even when the driver’s door is open.

To keep the lights on after turning off the engine, turn the position lamps OFF and ON again using the headlamp switch on the steering column.

Lighting
This vehicle is equipped with a variety of lights to illuminate both the interior and exterior of the vehicle. CAUTION To prevent the battery from discharging, do not leave the headlamps or int ...

Headlight delay function
If you press the ENGINE START/STOP button OFF or to ACC with the headlamps ON, the headlamps and parking lights on your Kia Sorento will remain on for approximately 5 minutes. When the engine is ...

See also:

Resetting the power liftgate
Electronic recalibration of the Kia Sorento motorized liftgate drive module becomes necessary under specific maintenance or power loss scenarios, including: Recharging a comple ...

Warning Lamp Activation
Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a bulb check. The l ...

Cruise Control Switch Inspection
Measuring Resistance 1. Disconnect the cruise control switch connector from the control switch. 2. Measure resistance between t ...

Copyright © www.ksmanual.com 2014-2026